Stage 2 3.8 Cross Bolted On Center

[Nashty]

3.8 Stage 2 on center block

3.810" bore, no sleeves, no damage
Fully studded top and bottom.
Bronze lifter bores.
(4) Steel caps, middle 2 are 4 bolt front and back are cross bolted
Lifters are fed individually from a common tube that picks up it's oil at the back of the block.
no internal oil pickup provision.
Covered in cosmoline.

Block has no damage whatsoever to my eye.

$1600

[bumpin_records]

i want to know about the block. do you ahve pictures are you interested in sending it to a machine shop so i can have it checked out i can pay for that if its good i will pay if its bad you pay let me know email me at bumpin_records@yahoo.com

[JayC]

Wow.. good deal..

[bumpin_records]

do you still have the block 4 sell im interested

[Nashty]

No but I have a 4.1 S2 OFF center block, crank and al. rods that is available.

The other one sold. If you want to come down and look at it, that's fine but I'm not sending it to a machine shop to be stuck with the bill if you or anyone else changes their mind.

[John Wilde]

what is the stroke on the crank???

[Nashty]

What I meant to say is that the block is for sale. I added the crank and al. rods for reference to mean that the block was clearanced for the rods. I realize now looking at the post that it didn't sound that way, my bad.

The crank isn't available right now. It is a 3.59 I believe.

[drturbo69]

You Have A P.m
Thanks Frank

[drturbo69]

Very Interested In Block Offcenter
Email Me If Still Have
Thanks Frank

[drturbo69]

Email Me Very Interested
Thanks Frank

[Nashty]

I'll give you a call. The crank is also available now, it is 3.50" stroke, the block is 4.00" bore, internal oiling 4 bolt mains, head studs included also. Lifter bosses drilled for oiling. No damage, no issues. It is an excellent block and crank. Was a spare for a drag team.

Roger

[plowboy72]

how much for the stageII block?

[Nashty]

Sold it. I'm fresh out of Stage parts again.