87 Intake

[GoGo84]

I have recently made the move to an 87 style motor to go in the car. :arco: However, I have never seen a complete 87 intake before and I need to know which bolts are "bolts" and which bolts are "studs"

Thanks,
Whit

[HairDrier]

The pass side rear is a stud for all the grounds. I cant remember any others

[Tom Shea]

The pass side rear is a stud for all the grounds. I cant remember any others

The only stud you may want is the one for the egr controller. That one is on the driver 2nd from rear. The grounds should go to the back of the passenger side head, not to the intake. There was a stud bolt on the front 2nd psgr side to a eng lift loop. You can get along without that one unless you want it to be "factory correct appearing".