Quick ? for you guys that have swapped to the th-350

[GCooper]

Question is.........Do you use the rubber isolators that go on the ends of the cross member on the th-350 cross member? It does not line up right for me...actually the holes are just big enough for bolts to go through...the rubber pads do not.

[REDS TTYPE]

original v8 crossmembers had centered tranny mounst and bolted directly to the frame with a bolt n nut setup

v6 motored cars had offset tranny mounts and rubber mounts at the frame

so if its got only little holes for bolts it goes flat on the frame

[GCooper]

original v8 crossmembers had centered tranny mounst and bolted directly to the frame with a bolt n nut setup

v6 motored cars had offset tranny mounts and rubber mounts at the frame

so if its got only little holes for bolts it goes flat on the frame

Thanks John........I thought that but wanted to be sure! :applaus:

[REDS TTYPE]

I've been called Jodi :arco: but Not John

normally Red will do :zahn: