oil tube

[MagicMan]

where can i get an oil replacement tube...you know the tube that goes into the valve cover. the end is bend so it doesn't lock on the valve cover
thanks guys

[MagicMan]

can anybody help me? also is it a good idea to plug the hole on the tube and plug the hole on the air intake pipe thus elimanating the rubber hose connecting the oil tube and intake pipe?

[grandnash84]

poston sell an oil cap with a breather. gm dosent make one any more and you are going to have to plug up the hole to the intake anyway because the aftermarket ones dont use it

[racemybuick]

I plugged mine and use a K&N breather on my valve cover. I think that is the most common route anyone has taken...Good luck!

John

[zbuickman]

I plugged mine and use a K&N breather on my valve cover. I think that is the most common route anyone has taken...Good luck!

John
I used the k&n as well and pluged the hole in the intake tube

[MagicMan]

can any of you guys send me a link to a kn oil breather that would eliminate the oil filler tube

[zbuickman]

http://www.yearone.com/serverfiles/headline.asp?hid=B12AL4193
This one should work. :zahn: