Question

[kevin turch]

My car is out of commission now, but im going to be pulling the motor next year and im shooting for a trap of 120 or so when its all said and done.

Right now my best is 114, and this is with a TA-49. blue tops, big neck Ic and alchy. (i pushed it and blew a HG on that run :applaus: )

I plan on the heads getting done also while the car is out.

Now, what do u guys recommend for me to hit that goal?

I plan on sending my turbo to Jogn Craig to get upgraded, but im not sure what to get it upgraded too, he said i can only go upto a ta-62 with the 49 im sending him.

Tranny is from Vince J, and i have a 3000 9/11 from Bruce.

Any suggestions would be helpful, thanks

Kevin

[HairDrier]

I would get at least a 63 turbo, forged pistons and a roller cam around 208 degrees.

Once you hit 120 you know you will want to get a 10.99, which can be done with a 63, but would be easier with a T-66 or 45a.

Some 57# injectors should give you plenty of fuel

An intercooler upgrade would also help, but I dont think a front mount is necessary

[kevin turch]

The motor was done a few years back with Gapless rings and JE pistons, so hopefully those will do

[HairDrier]

What cam is in it