Fuel pressure regulator

[Quick Turbo V6]

I wondering what fuel pressure regulator you guys are running? I have a Weldon 2025 pump.

Thanks,
Scott

[N2BUICK]

Weldon!
I run a 2040-200-A regulator.
If you have spent that kind of money on good pump,you should also have a good regulator.
I run a Weldon 2015 pump.
One of your biggest problems is getting a regulator to return that kind of pump capacity at idle!
Austin

[John Wilde]

I agree with Austin go with the Weldon Unit.
The race aeromotive piece is not bad either but
since you already have a weldon product maybe stick with them.

[gnsrule]

Im runnin a Stock Billit reg on a stock rail w/ a 2015. #6 return line right off the bottom of the reg.
No problems yet, but mines only went around the block a few times. I'll post more if problems arise.

[Turbobuick]

I have a 2025 and run the 2040 reg. I have an extra one for sale if you need a regulator.

[Nashty]

I have an Aeromotive Eliminator pump on my car. It hasn't been out yet but I've seen it running on the car. It flows a shit load though. It pisses out the full -06 fuel line like a jet stream. The pump itself sounds like it's chain driven.

[turbodave231]

I'll be using a Weldon 2025 with an Aeromotive regulator. Mounted the regulator last nite. I'm busy plumbing the whole new fuel system. Damn Aeroquip stuff is sure expensive!

I probably would have bought the Weldon Regulator but I got a package deal on the Aeromotive filters and regulator.

DR

[Mike Licht]

Weldon would be my first choice followed by Areomotive
Mike

[EightSecV6]

I use 2 SX regulators, I have a 2035, I would get the Weldon it will work the best. I had mine set up before Weldon had a pump that would meet my needs, I used 2 SX pumps and one regulator could not return the fuel.

[Chuck]

I wondering what fuel pressure regulator you guys are running? I have a Weldon 2025 pump.

Thanks,
Scott

Is the application for the street ?? If so, that pump will have overheating problems w/ continous operation. I think WELDON recommends no more than 15 minutes at a time.

Oh ya.. :frech: :frech: :add_wegbr

[Quick Turbo V6]

Is the application for the street ?? If so, that pump will have overheating problems w/ continous operation. I think WELDON recommends no more than 15 minutes at a time.

Oh ya.. :frech: :frech: :add_wegbr

Thanks for all the help! I'm going to run the aeromotive controller box with the pump for my "street" driving.

Scott

[Chuck]

Hey, Scott...Another version. :thefinger
Good idea on the controller! :rock:

[Quick Turbo V6]

Hey, Scott...Another version. :thefinger
Good idea on the controller! :rock:
:anbet:

Scott