John Larkin
02-21-2004, 06:08 PM
Earls 9919EFJ - a fitting that will screw into the fuel inlet to convert to -8AN fitting. You have to cut about 1/4" of thread off and use a bronze crush washer but it works.
Earls 991954 - a fitting that will thread into the bottom of a stock style regulator with o-ring included. This converts to -6AN fitting. It is fairly long but a 90° forged hose end will fit (barely) and clear the vacuum lines.
Earls 991954 - a fitting that will thread into the bottom of a stock style regulator with o-ring included. This converts to -6AN fitting. It is fairly long but a 90° forged hose end will fit (barely) and clear the vacuum lines.