I need what it will take to build up a 9.90 motor.

[turbokid]

what All do I need to run some 9.90-.80's. I have a 4.1 block and champ. iron heads. I need the list:
turbo
cam
injectors
chip or somthing else

thanks for the help

[JayC]

The 4.1 block will never make it. Throw it in the garbage. Get a 3.8 and some caps or girdle. I've used both, they both work, although I prefer the girlde personally.

Turbo, a GTQ71
Cam, depends on your budget really and what the car is really going to be used for.
Injectors, some 72-75s should be fine.
Fuel management, again, depends on what the car is going to be used for.

You have my number, gimme a ring at home and I'll try to help you out.

[HairDrier]

I recommend an ME-R for a chip, dont go cheap on the cam. Go billet roller

[10SecGN]

I would say 214/214 Billet roller Cam, Champ Iron heads, 83# Injectors, F.A.S.T., GTQ 70 Turbo, FMIC. Basically my setup with more turbo and injectors.



Sully

[turbokid]

Hair drier where can I find more about the me-r?
thanks
richie

[HairDrier]

Hair drier where can I find more about the me-r?
thanks
richie

http://maxeffort.tripod.com

Steve has some of the best customer service in all of TR land, and you will have complete control of fueling for less than half that of a FAST system

He also has a bulletin board set up just to answer ME questions

[NCTURBOS]

what All do I need to run some 9.90-.80's. I have a 4.1 block and champ. iron heads. I need the list:
turbo
cam
injectors
chip or somthing else

thanks for the help

Richie,

Check out this link:

http://www.turbobuick.com/forums/showthread.php?s=&threadid=112102

There may be some helpful info there.

K.