2004-R accumulator shims

[fastfreddie]

Hey guys, I'm going to put a Trans-Go No Yo Yo kit in my trans, and I remember the last time I did this in my first GN, I used 3/8" nuts to shim the accumulators, but I don't remember if I put them on the top or bottom of the pistons. Any advice/suggestions would appreciated.

TIA

Fast Freddie
turbopig@solarstop.net :albert:

[CHRIS718]

:joint:sometimes we forget.first the shims or nuts ,then the piston and then the spring. Hey guys, I'm going to put a Trans-Go No Yo Yo kit in my trans, and I remember the last time I did this in my first GN, I used 3/8" nuts to shim the accumulators, but I don't remember if I put them on the top or bottom of the pistons. Any advice/suggestions would appreciated.

TIA

Fast Freddie
turbopig@solarstop.net :albert:

[fastfreddie]

:joint:sometimes we forget.first the shims or nuts ,then the piston and then the spring.


Cool, I thought that was it, but wasn't sure. Thanks a bunch!

Fast Freddie
turbopig@solarstop.net